Aluminum Extrusion

• Press size ranges from 1100 UST to 11000 UST; short-stroke or conventional design, direct or indirect, with or without piercer; for aluminum, brass or copper
• Short-stroke design for a smaller footprint and more rigid press frame with consequent improved constant positioning of die and shorter dead cycle time; all stem and dummy block maintenance performed out of press centerline
• Finite Element Method for dimensioning main cylinder platen, die platen and prefill valve ring
• Forged Steel Main Cylinder platen, die platen and moving crosshead
• Pre-stressed forged steel tie rods with casings
• Flat guide system with independent vertical and horizontal adjustments
• Butt shear with pivoting blade to insure optimum shear line
• Stem and dummy block with bayonet type mounting
• 4 zone container heating and 2 zone container cooling
• No Burp Extrusion (NBE)
• Continuous container holder alignment read-out
• Die ring to bolster profile shearing, on vertical of horizontal axis
• Die stack locking devices on vertical and horizontal axis to insure a consistent die face position
• Billet loaders: shuttle or aerial (both for short-stroke press, with onboard pusher & cantilevered loading), or pivoting arm type with adjustable clamp (for conventional press)
  
• Oilgear or Rexroth hydraulic system with independent oil cooling & filtering circuit
• Danieli Breda proprietary design prefill valve
• Spherical connection between oil tank and prefill valve to compensate for expansion and contraction
• Allen-Bradley PLC system with BreDanext on-line modem support
• All main movements and oil level controlled by transducer (Balluf and MTS)

Contact:
John Brandon
724.778.5403
j.brandon
@danielicorp.com